Please use a dampened cloth with a detergent to clean the palm rest. Do not under any circumstances use isopropyl alcohol or ethanol-based products for the palm rest, as they'll dissolve the lacquer!
Use a Philips PH2 screwdriver to fix the palm rest to the UHK using the 4 palm rest screws that you can find in the spacer of the palm rest box. Partially tighten the screws, then pull the palm rest away from the keyboard while fastening it to make it perfectly parallel with the keyboard, and finally fully tighten the screws.
Now you have three options: tenting, negative tilting, and positive tilting. We feel obliged to mention that despite its mainstream popularity, positive tilting is not ergonomical like tenting and negative tilting are, because it makes your wrists bend backwards. With this out of the way, let us show you how to install each of these configurations.
Choose one of the following to proceed to the next page:
